TOP

General View of Control Panel

PULSED TIG CONTROLS

The Pulsed TIG function switches the amperage from a high(peak) to a low(background) at a set rate(PPS). Pulsing can reduce heat input by lowering the average amperage, increasing control of the weld puddle, penetration and distortion. The following parameters can be adjusted for desired results:


Low-Speed Pulse   High-Speed Pulse
1 to 10 pulses per second(PPS) will produce a distinct ripple pattern in the weld bead. Can be used to time filler addition, reduce distortion and improve control. 100 pulses per second(PPS) and higher helps to focus the arc for increased stability, penetration and travel speed. Increased puddle agitation improves weld microstructure.

Arcforce correction (welding characteristics)

Arcforce is a setting that allows you to adjust the arc to soft smooth arc to a more aggressive digging arc. Setting high is to bump up amperage when you have a really tight arc so that you keep welding.

HOT START

Hot start function reliably ignites the electrode and melts perfectly to ensure the best quality even at the start of the seam. This solution makes lack of fusion and cold welds a thing of the past and significantly reduces weld reinforcement. Adjust the hot start current here and the time here.

Technical specifications

Item No TIG-160P TIG-200P
Rated Input Voltage 1PH ~ 230V ±15% 1PH ~ 230V ±15%
Max. Load Power Capacity TIG: 4.10KVA TIG: 5.63KVA
Rated Duty Cycle(25℃) 35% MMA: 6.60KVA MMA: 8.75KVA

Rated Duty

Cycle(25℃)

60% TIG: 160A/16.4V TIG: 200A/18V
MMA: 160A/26.4V MMA: 200A/28V
100% TIG: 140A/15.6V TIG: 160A/16.4V
MMA: 140A/25.6V MMA: 160A/26.4V

MMA

Pulse Width (Ratio) 1~100% 1~100%
Arc-starting Current 5A~200A 5A~250A    
Crater-filling Current 5A~200A 5A~250A
Current Up-slope Time 0.1S~15S 0.1S~15S
Current Down-slop Time 0.1S~15S 0.1S~15S
Pre-Gas Time 0.1S~15S 0.1S~15S
Flow-Gas Time 0.1S~15S 0.1S~15S
Spot Arc Time 0.1S~15S 0.1S~15S

MMA

Dimension
Arc Force 10A~160A 10A~200A
Hot Start Time 0.1~3S 0.1~3S
Hot Start Current 10A~160A 10A~200A
(LxWxH)410x185x310mm 410x185x310mm
Weight 12KG 12KG

ACCESSORIES

For Standard Accessories

TIG torch: TIG-26

Argon gas regular


For Optional accessories

Argon gas regular

Foot Pedal

DOCUMENTS

TIG-160P/200P

TIG-160P/200P

Copy right © 2016 Broad
Indurstrial (Group) LTD. Support By.